Sp Flash Tool is the application that is provided and developed by MediaTek company to improve the performance of their processors. Meditek is world famous IC designer for smartphones, tablets, consumer goods and many more.
Install or Flash Seatter Firmware Using Sp Flash Tool
- Working ability on both Linux and Windows computer
- Faster performance
- Ability to flash both Stock and Custom ROMs
- Ability to flash Custom recovery
- Checking and verifying the external RAM memory
- Formatting the device
What You Need To Use Sp Flash Tool
- Since Sp Flash Tool is a PC based utility software you need a Windows
- Or a Linux computer (32 or 64-bit)
- Original USB cable of your device
- MediaTek USB-VCOM drivers Firmware file you are going to flash along
- with the scatter file
- Scatter file contains the information of device structure and the memory map of the image file.
- Since sp flash
- tool is scatter based always check if the firmware file contains the scatter file.
Downloads
Download All SPD_Research Tool
Installing MediaTek USB-VCOM drivers on Windows computer
Sometimes MediaTek drivers are not allowed to install on Windows computer. In the situation like that follow Disable signature verification enforcement process
- Click Start > Settings>Update & security > Recovery
- Advanced Startup > Restart Now
- Troubleshoot > Advanced options> Start Up settings > Restart
- Then the computer will restart with the startup setting screen
- To Disable signature verification enforcement until next restart
- press F7
- After restarting the computer, you can go forward with MediaTek
- USB-VCOM drivers
How To Flash Stock ROM Using Sp Flash Tool
- Download Sp Flash Tool and extract it
- Download Stock Firmware you wish to flash and extract it
- Switch off your smart device
- Now click “Flash_exe” to launch the Sp Flash Tool
- Click download tab and click the scatter loading button to load
- scatter file
- Scatter file is located in the firmware file
- Click on the “download icon” to launch the flashing process
- Then connect your smart device and click volume up or down button to
- ease the computer to recognize the smart device
- Wait for about 10 minutes, after a successful operation a message
- will be displayed along with a green circle.
How To Flash Custom ROM Using Sp Flash Tool
- Download the relevant Custom ROM for you android MediaTek device
- Unzip the folder
- Start your computer in “Device driver signature disabled” mode
- Install MediaTek USB-VCOM drivers
- Launch Sp Flash Tool in “Administrator Mode”
- Next, click “Scatter-loading” and load the scatter file that is
- located in the firmware file
- Now select the “Download Agent” go to the Sp Flash Tool folder and
- Select “MTK_AllInOne_DA.bin”
- After the above steps go to the”Format” tab and check the validation
- Now switch off your device and connect
- Then click start and to format the device
- Next, disconnect the device and click on the download button under
- the download tab
- Again connect the device
- Then the custom ROM installation will begin and wait for about 10
- minutes A green tick will appear after successful installation
- Hope this guide would be helpful to you.
